Porto - Multipurpose Website Template

Pipe Clamps And Hangers

Pipe Clamps and Hangers used in the support of pipes and equipments are manufactured according to the highest standards of fabrication.A diversified choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps, J and U-Bolts and Threaded Accessories.

Download Catalogue

Pipe hangers offered in this section are designed to support pipes allowing for vertical adjustment and limited movement in the piping system.

Applicable Standards

  • BS 3974
  • ASTM F 708
  • ANSI/MSS SP-58
  • MSS SP-69
  • MSS SP-77
  • MSS SP-89
  • MSS SP-90
  • MSS SP-127

Material

Carbon Steels are used in the manufacturing of pipe hanger

Load Data

The load data published includes a safety factor of 4.0 unless noted (safety factor = ratio of ultimate load to the design load).

Split Pipe Clamp with Long Nut M8/ M10 without rubber gasket

  • Materials: Steel S235
  • Service: Multifunction screw with hexagonal combination head (slot & crosshead), c/ w retaining washer
  • Finish: Electro Zinc Plated

Split Pipe Clamp with Standard Nut M8 without rubber gasket

  • Materials Steel S235
  • Service: Economy option
  • Finish: Electro Zinc Plated

Split Pipe Clamp with Rubber with Long Nut M8/ M10

  • Materials: Steel S235
  • Service: EPDM rubber insulation for sound reduction compliant with DIN 4109
  • Finish: Electro Zinc Plated

Split Pipe Clamp with Rubber with Standard Nut M8

  • Materials: Steel S235
  • Service: EPDM rubber insulation for sound reduction compliant with DIN 4109
  • Finish: Electro Zinc Plated

Omega Conduit & Pipe Clamp

  • Two-Hole Pipe Strap/ U-Clip
  • Materials: Steel S235
  • Service: Designed for hanging conduit (rigid or EMT) to beam clamps, available with or without closure bolt
  • Finish: Electro Zinc Plated

Channel Clamp

  • Materials: Steel S235
  • Service: For mounting (rigid or EMT) and steel pipes on C-Channels
  • Finish: Electro Zinc Plated or Hot-dip Galvanized

Pipe Strap

  • Two-Hole Pipe Strap/ U-Clip
  • Materials: Steel S235
  • Service: Designed for supporting pipe runs on walls and on C-Channels
  • Finish: Electro Zinc Plated

One-Hole Pipe Strap (Snap Type)

  • Materials: Steel S235
  • Service: Designed for supporting standard conduits, cable and steel pipes on walls or sides of beams or on C-Channels
  • Finish: Electro Zinc Plated

Noise Suppression Profile

  • SR noise-suppression strip for insertion in clamps and hangers
  • Materials: EPDM. Rubber
  • Electrical Values: Specific resistance: 2x109 M ohm cm2 & the Surface resistance: 2 x109 M ohm

Offset Pipe Clamp

  • Materials: Steel S235
  • Service: Designed for supporting and stabilizing vertical pipe runs
  • Finish: Electro Zinc Plated or Hot-dip Galvanized

Clevis Hanger

  • Materials: Steel S235
  • Finish: Electro Zinc Plated or Hot-dip Galvanized
  • Application: Designed for suspending pipes

Adjustable Band Hanger

  • Materials: Steel S235
  • Finish: Electro Zinc Plated or Hot-dip Galvanized
  • Application: Designed for suspending n-insulated stationary pipe line. Knurled nut can be supplied in 8 to 10 mm diameter

C-Clamp

  • Materials: Malleable Cast Iron Zinc plated Casting tolerance according to DIN 1684 GTA/17 with hexagon head screw DIN 933 8.8, threaded end with cup point according to EN ISO 4753 and locknut DIN 439 for sprinkler systems, heating, ventilation and air conditioning, acoustic tubes and sanitary installation machines and steel constructions.

Steel Beam Clamp Open

  • Materials: Steel S235
  • Service: Designed for attaching hanger rods to the top or bottom flange of a beam
  • Finish: Hot-dip Galvanized
  • Ordering: Specify flange width and thickness
  • Steel Size: 5X30 mm

Steel Beam Clamp Closed

  • Materials: Steel S235
  • Service: Designed for attaching hanger rods to the top or bottom flange of a beam
  • Finish: Hot-dip Galvanized
  • Ordering: Specify flange width and thickness
  • Steel Size: 5X30 mm, 5X40 mm

Window Beam Clamp

  • Materials: Steel S235
  • Service: Designed for attaching hanger rods to the top or bottom flange of a beam
  • Finish: Electro Zinc Plated
  • Steel Size: 6x90 mm

J - Bolt

  • Materials: Steel S235
  • Service: Designed for attaching to beam flange or purlin and as a concrete insert
  • Finish: Electro Zinc Plated

L - Bolt

  • Materials: Steel S235
  • Service: Designed for use as an anchor embedded in concrete
  • Finish: Electro Zinc Plated

Light Duty U - Bolt

  • Materials: Steel S235
  • Application: Designed as a support, guide, or anchor for light - duty pipes
  • Finish: Electro Zinc Plated

Eye Rod

  • Materials: Steel S235
  • Application: Designed for use in hanger supports to eliminate possible bending of threaded rod
  • Finish: Electro Zinc Plated

Turnbuckle

  • Materials: Steel S235
  • Finish: Electro Zinc Plated